設為首頁
收藏我們
主營產品:記錄儀,數顯儀,校驗儀,萬用表,PH計,電導率儀,功率計,指針表,示波器,傳感器  
當前時間:
 
產品搜索
日本橫河YOKOGAWA
·橫河電機
·指針電表
·數字萬用表
·兆歐表/絕緣電阻表
·鉗型電流表
·便攜式校驗儀
·功率計
·有紙記錄儀
·無紙記錄儀
·記錄儀配件
·便攜式記錄儀
·數字調節儀
·信號轉換器/互感器
·溫度變送器
·壓力變送器
·電磁流量計
·手操器
·數字溫度計
·數字照度計/色度計/輝度計
·氧分析儀
·電導率儀
·PH/ORP計/電極
·探頭/傳感器/電纜
·DCS卡件/模塊/PLC
·分流器/變壓器/電阻器
·氯氣分析儀
·張力計
日本小野ONOS0KKI
·位移傳感器
·轉速傳感器
·轉速表
·加速度傳感器
·轉換器
·噪音計/聲級計
·位移計數器
·轉速顯示器
日本島電SHIMADEN
·PID調節儀
日本日置HIOKI
·測試線/溫度探頭
香港上潤WP
·數顯控制儀
·PID調節儀
·操作器
·流量積算儀
·多路巡檢儀
·報警控制儀
·數顯電力表
·隔離轉換器
·隔離安全柵
·數字運算器
·智能功率儀表
香港虹潤HR
·數顯控制儀
·調節儀/溫控器
·多路巡檢儀
·流量積算儀
新虹潤NHR
·數字顯示儀
·流量積算儀
·操作器
中國臺灣艾普斯APC
·穩壓電源
·變頻電源
圣斯?fàn)朇E
·電量隔離傳感器/變送器
·調理器/配電器
·功率/功率因數隔離傳感變送器
·數顯表
杭州盤古PG
·VX6100彩屏無紙記錄儀
·VX5100藍屏無紙記錄儀
昆侖工控
·數顯儀
·數字調節儀
·多路巡檢儀
·流量積算儀
·無紙記錄儀
·操作器
·電力儀表
·轉速/線速/扭矩測量儀
·智能計數器/計時器
其他國產儀器
·兆歐表/接地電阻/絕緣電阻測試儀/搖表


 
 
產品信息
 
點擊放大
產品型號:
FA-M3
產品名稱:
FA-M3可編程控制器
產品報價:
產品特點:
FA-M3可編程控制器:
可以實現超高速處理和控制穩定的特點。它集成了一個節省空間的緊湊設計,支持靈活的范圍覆蓋了8192輸入/輸出點,并配有各種先進的模塊,它可以用來配置應用廣泛,F(xiàn)3SP35、F3SP38、F3SP58、F3SP59、F3SP67。
  FA-M3FA-M3可編程控制器的詳細資料:

FA-M3可編程控制器

日本橫河FA-M3可編程控制器:
本種fa-m3是新一代可編程控制器控制器,可以實現超高速處理和控制穩定的特點。它集成了一個節省空間的緊湊設計,支持靈活的范圍覆蓋了8192輸入/輸出點,并配有各種先進的模塊,它可以用來配置應用廣泛,F(xiàn)3SP35、F3SP38、F3SP58、F3SP59、F3SP67。General
The Range-free Multi-controller FA-M3 is a next-generation programmable
controller, which achieves high performance through its ultra high-speed
processing and stable control features. It incorporates a space-saving compact
design, supports versatile ranges with cover for up to 8192 input/output points,
and is equipped with a variety of advanced modules, which can be used to
configure a wide range of applications.
With the FA-M3, decreased total cost of ownership (TCO) can be realized
through openness, improved functions and reduction in the size of machines
and facilities.
Features
The increased speed of the FA-M3 has been achieved as a result of adopting
the concept High Speed IPRS which is based on four factors; Instruction,
Process, Response and Scan. This contributed to increased accuracy of
instruments and productivity. The FA-M3 has also inherited structured
programming and uses an “object ladder*” to create an efficient total design, all
the way from planning to maintenance.
*: “Object ladder” is a program development concept aimed at dramatically improving customization
efficiency by integrating programs and devices into independent objects (e.g., blocks) on function
basis.
Ultra-high Speed Processing
The high-speed instruction processing capability of the FA-M3 makes it ideal for
applications that require high speed and quick response.
- The F3SP28 and F3SP38 CPUs achieve a scan time of 1 ms for a 6K steps
program*.
- The F3SP53, F3SP58, F3SP59, F3SP66 and F3SP67 CPUs achieve a
scan time of 1 ms for a 20K steps program*.
*: The scan times mentioned above can only be a achieved under specific conditions and vary
depending on the contents of the program and system configuration.
Sensor Control Function
This function allows one CPU to perform a parallel operation at a minimum scan
time of 200 μs while carrying out a main scan during program operation. It
enables one block of the program to be executed at high-speed and fixed
intervals independently of a main scan, which features high performance and
advanced functionalities.
Built-in Network Function (when using F3SP66, F3SP67)
These sequence CPU modules have a built-in network function, which
complements high-speed control with fast access and storage of large files.
With pre-installed support for a wide range of common communication
protocols, it addresses diverse application network requirements, and enables
transfers of large files.
Multiple CPUs
The FA-M3 can accommodate up to 4 CPUs in one base module depending on
the system size, program size and CPU aptitude. The supported CPU modules
include sequence CPU modules as well as BASIC CPU modules.
Program Reusability
Object ladder allows integration of programs with devices into components on
function basis. This improves the reusability of user software and efficiency of
machine custom design.
- Local Device
Devices used as variables in designing blocks or component macros have
been compley independent. The same name devices can be recognized
as the different devices so that analyses and adjustment of the device
structure for reuse of ladders are not necessary.
- Index View
The view of a ladder program, except for comments on circuits, can be
hidden or shown by collapsing or expanding as necessary. This gives better
visibility and allows detailed debugging while allowing for an understanding
of the whole flow of the program, which improves debugging efficiency.
- Windows Environment
The FA-M3 incorporates many functions, such as OLE, which run under the
Windows environment. This allows data such as comments and tag names
to be exchanged with Microsoft Excel, and ladder diagrams to be
exchanged with Microsoft Word using drag-and-drop operations.
Open Network
The FA-M3 supports open network protocols such as Ethernet, FL-net,
DeviceNet, AS-interface, PROFIBUS-DP, GP-IB, RS-232-C/422 and NEXUS,
and provides a range of modules for use on a variety of networks ranging from
field networks to system configuration networks.
I/O Configuration
Up to Seven Additional Subunits for I/O Extension
Up to 8192 inputs and outputs can be processed (for F3SP35, F3SP38,
F3SP58, F3SP59 and F3SP67).

廣州技創電子設備有限公司公司展臺:http://m.stateofmusicct.com

產品相關關鍵字: FA-M3可編程控制器 FA-M3控制器 FA-M3
 如果你對FA-M3FA-M3可編程控制器感興趣,想了解更詳細的產品信息,填寫下表直接與廠家聯系:

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7
 相關同類產品:
 
 
廣州技創電子設備有限公司 版權所有 地址:廣州市天河區東圃大馬路天力街7號匯誠商業大廈212室 郵編:510660
電話:86-020-82348737 傳真:86-020-82348703 聯系人:吳榮彬
郵箱:2628225136@qq.com
GoogleSitemap 管理登陸 ICP備:粵ICP備11101390號 網站關鍵詞:
點擊這里給我發消息
點擊這里給我發消息
點擊這里給我發消息
手機:13710725812
電話:020-82348737
傳真:020-82348703
收藏我們
 

環保在線

推薦收藏該企業網站